Rivier College
Syllabus
CS553A Introduction to Networking Technologies
1. Course number and title: CS553A Introduction to Networking Technologies
2. Instructor’s name: Dr. Vladimir V. Riabov, Associate Professor; Office: STH-312; Tel: (603) 897-8613;
E-mail: vriabov@rivier.edu;
Web site: http://www.rivier.edu/faculty/vriabov/
3. Course description: A survey of the technologies available for network solutions to distributed processing problems. Topics include: layered network architectures, signal transmission analysis, transmission media, data encoding, local and wide area networks, communications architecture and protocols, modeling techniques with OPNET software. Prerequisite: CS250 Data Abstraction.
4. Course objectives:
This course attempts to provide an overview of the rapidly growing field of networking technologies, data and computer communications, and encourage students to develop a solid foundation and on-hand experience in these areas. Topics to be covered include data communication networking models, protocols (TCP/IP, IPv4, IPv6, OSPF, BGP, and others), standards, analog and digital data transmission, transmission media (twisted pair wires, coaxial cables, fiber optics, and satellite communications), broadband technologies, multimedia communications, ISDN, xDSL, SONET, packet switching, ATM, LAN systems (Ethernet, CSMA/CD, Token Ring, Fibre Channel, Wireless LANs), switching and routing networks, and network security.
Upon completion of this course, the student should learn:
· Layered network architectures, OSI Reference Model, and TCP/IP protocol suite
· The Internet Organizations and some RFC Publications
· Networking Protocol categories (Transmission services, Addressing, Flow and Error Control, Multiplexing, Segmentation and Reassembly, Routing, Encapsulation, etc.)
· Applications (SMTP, FTP, TELNET, HTTP, and others)
· Analog and Digital Data Transmission Methods
· Difference between synchronous and asynchronous communications
· Signal transmission analysis, its strength and delay distortion, bandwidth limitations (Nyquist and Shannon theories), International Reference Alphabet, Fourier concepts
· Guided transmission media (twisted pair, coaxial cable, optical fiber), wireless transmission technologies (microwave, infrared, radio), and satellite systems
· Modulation theory and modems
· Data Communication Interfaces and standards, line configurations (topology, full/half duplex)
· Data link control principles: Logical Link Control (LLC), Asynchronous Transfer Mode (ATM)
· Multiplexing techniques (Frequency-Division, Time-Division)
· Digitization techniques (Pulse Code Modulation), digital transmission technologies (T1 and T3)
· Broadband technologies (ISDN, ASDN, xDSL, and cable modem)
· Fiber optic transmission systems and SONET
· Wide-Area Networks (Circuit-Switching, Packet-Switching, Frame Relay, ATM, Broadcast networks topologies, such as bus, ring, and star)
· Routing Strategies and Protocols
· Asynchronous Transfer Mode (ATM)
· LAN Technology (BUS, Ring, Star, Wireless, and Bridges)
· LAN Systems (Ethernet, CSMA/CD, Token Ring, FDDI, Fiber Channel, Wireless LANs)
· Internetworking Protocols (IPv4, IPv6, ICMP, IGMP)
· Routing Protocols (BGP, OSPF, RSVP)
· Transport Protocols (TCP, UDP)
· Network Security (Encryption, Digital Signature, IPSec)
· Networking simulation and modeling techniques with OPNET software.
5. Class Dates and Time: September 8, 2005 – December 15, 2005
6. Required textbook: W. Stallings, Data and Computer
Communications, 7th edition, Prentice Hall, 2004 (ISBN:
0-13-100681-9).
Kevin Brown and Leann Christianson, OPNET Lab Manual to Accompany Data and Computer Communications (7th edition), Pearson Prentice Hall, 2005
(ISBN: 0-13-148252-1) [optional].
7. Recommended books:
· Andrew S. Tanenbaum, Computer Networks, 4th edition, Prentice-Hall, Inc., 2003, ISBN: 0-13-066102-3.
· Larry L. Peterson and Bruce S. Davie, Computer Networks: A Systems Approach, 3rd edition (2003), Morgan Kaufmann Publishers, ISBN: 1-55860-832-X.
· Tom Sheldon, McGraw-Hill's Encyclopedia of Networking & Telecommunications, 2nd edition, McGraw-Hill Professional Publishing, June 2001, ISBN: 0072120053.
· B. A. Forouzan, Data Communications and Networking, 3rd edit., McGraw-Hill, 2004, ISBN: 0-07-251584-8.
· A. Dennis, Networking in the Internet Age, 5th edition, Wiley, 2002, ISBN: 0471201898.
· James F. Kurose and Keith W. Ross, Computer Networking: A Top-Down Approach Featuring the Internet, 3rd edition (2005), Pearson education, Inc., ISBN: 0-321-22735-2.
· Srinivasan Keshav, An Engineering Approach to Computer Networking, 1st edition (1997), Addison-Wesley Pub Co; ISBN: 0201634422.
· W. Stallings, Wireless Communications and Networks, 1st edition (2001), Prentice Hall, ISBN: 0130408646.
· Radia Perlman, Interconnections: Bridges, Routers, Switches, and Internetworking Protocols (Addison Wesley Professional Computing Series), 2 edition (October 1999), Addison-Wesley Pub Co; ISBN: 0201634481.
· Leon-Garcia and Widjaja, Communication Networks: Fundamental Concepts and Key Architectures, McGraw-Hill Professional Publishing, 1999.
· Ata Elahi, Network Communications Technology, 1st edition, Delmar Publishers, 2000, ISBN: 0766813886.
· E. Gray, MPLS: Implementing the Technology (with CD-ROM), Addison-Wesley, 2001; ISBN: 0201657627.
· D. E. Comer, Internetworking with TCP/IP, Vol. I: Principles, Protocols, and Architecture, 4th edition, Prentice Hall, 2000; ISBN: 0130183806.
· Jeff Doyle, CCIE Professional Development: Routing TCP/IP, Vol. I, Macmillan Technical Publishing, Indianapolis, IN, 1998; ISBN: 1578700418.
· Darren L. Spohn, Data Network Design (McGraw-Hill Communications Series), 2nd edition, McGraw-Hill, 1997, ASIN: 0070603634.
· William Stallings, ISDN and Broadband ISDN with Frame Relay and ATM, 4th edition (1999), Prentice Hall.
· Articles published in IEEE and other Technical Journals.
· Technical information and white papers published on the Internet.
Partial List of Excellent Reference Sources for Classes and Project Assignments:
·
IEEE
Communications Magazine (technical journal);
· IEEE Journal on Selected Areas in Communications (technical journal);
· IEEE Network (technical journal);
· IEEE Spectrum (technical journal);
· IEEE Transactions on Communications (technical journal);
· Computer Communications (technical journal);
· Computer Networks and ISDN Systems (technical journal);
· Bell System Technical Journal;
· Lightware, The Journal of Fiber Optics (technical journal);
· Data Communications (trade magazine – O.K. for technical reference);
· Telecommunications (trade magazine – O.K. for technical reference);
· Byte (trade magazine – O.K. for technical reference);
· Embedded Systems (trade magazine – O.K. for technical reference);
· Communications Week (weekly newspaper – NOT for technical reference);
· Network World (weekly newspaper – NOT for technical reference).
8.
Classroom Policies:
a) Attendance: Active participation requires attendance and arrival to class in time to be prepared for work when the class period begins. You are expected to attend all classes. Much of the learning will take place in classroom activities that cannot be duplicated easily outside of class. If you miss class, you are responsible for doing all classroom activities you missed, getting the notes from a classmate, and turning in all work on the day it is due. If you miss more than two classes, your absences will be reported to the registrar and you must meet with the professor to discuss the advisability of your remaining in the course for the remainder of the semester. Students who miss three classes may be withdrawn from the course and receive disciplinary action from the college (see Rivier College attendance policy). If you anticipate that job-related duties or prior commitments will cause several absences, please discuss the matter with the instructor outside of class.
b) Honesty policy: All work turned in on tests and the final must be entirely your own. Behavior contrary to this will result in a grade of F on the test. Serious infractions may result in an F for the course. Similarly, the paper you write for your project must not be plagiarized. See library discussion on plagiarism. Regarding homework, the instructor will not give you credit for any work that is copied from another source (from a classmate, instructor, a text, the answer key, web assistance, tutor, etc.). Take notes while getting help, but put aside the notes as you attempt to do the problems on your own.
c) Project Assignment (individual project): Your assignment is to write a study report or a research paper. The purpose of writing the report/paper is for you to gain an in-depth understanding of a particular topic that you are interested, or the technical knowledge that you learned will benefit you for your work or for your career development. It also gives you an opportunity to learn how to do independent research work as well as how to write a technical report/paper.
The potential topics for your report/paper are listed as follows:
· Compare state-of-the-art high speed intelligent modem to cable modem in networking technologies and applications;
· Fiber optic technologies and multimedia data communications;
· Satellite technology for data communications;
· Waveform digitization and audio/video compression techniques for multimedia communications;
· Voice over IP;
· Broadband technologies and multimedia applications;
· T1/T3/SONET technology for data communications;
· Compare xDSL to cable modem in technologies and applications;
· Frame Relay and ATM Technologies;
· Fast Ethernet and Gigabit Ethernet technology;
·
Wireless
communications technologies;
· A topic of your own selection (may be related to your work).
The paper should consist of about 15 typed pages plus illustrations, bibliography, and appendices (if necessary). A minimum of six technical articles and/or books must be used as sources for your paper. At least thirty percent of your reference materials should be technical articles published within two years.
You must submit your outline and discuss it with me before you start writing the paper or start your project. If you need advice regarding the topic to select, the format of the paper, the contents of the paper, or reference material, you should discuss it with me. Discussing the same with your classmates is also encouraged. The outline discussion process is very important, because, only through this process, I may help you to organize your paper, advise you on the contents of the paper, advise you on where to find references, and guide you to the right direction. The Project Paper is due on December 8, 2005.
d) FOUR homework assignments are scheduled (September 22, October 6, November 10, and December 1).
e) FOUR in-class labs are scheduled (September 29, October 13, November 3, and November 17).
Rivier College wants to provide reasonable accommodations to students with disabilities. To accomplish this goal effectively and to ensure the best use of our resources, timely notice of a disability must be provided to the Office of Special Services for verification and for evaluation of available options. Any student whose disabilities fall within ADA should inform the instructor within the first two weeks of the term of any special needs or equipment necessary to accomplish the requirements for the course. To obtain current information on this procedure, contact the Office of Special Services at telephone extension 8497.
Students are required to pass all exams and complete all assignments. Exams will be based on textbooks, lecture material, and handouts. All exams will be comprehensive, closed book and open notes, and will be conducted in-class. See “Project Assignments” for detailed project assignment requirements. Grades for all exams and assignments will not be determined by curves. Letter grades submitted to the Registrar’s Office would be based on the Rivier College Grading system. The conversion from numerical grade to letter grade will be based on the following table:
Letter Grade Honor Points Numerical Grade
AB 3.5 90-93
B 3.0 84-89
BC 2.5 80-83
C 2.0 73-79
F 0.0 Below 73
The grade is made up of your performance on your homeworks, labs, project, midterm and final exams.
Approximate weightings are as follows:
Homeworks 10%
Labs 10%
Midterm Exam 25%
Final Exam 30%
Project 25%
11. Due Dates:
Homeworks #1-4 due September 22, October 6, November 10, and December 1, 2005
Labs #1-4 (in-class) due September 29, October 13, November 3, and November 17, 2005
Project Proposal: October 6, 2005
Midterm Exam: October 20, 2005
Project due: December 8, 2005
Final Exam: December 15, 2005
SESSION TOPIC READING HOMEWORKS
1 (09/08) Basic Communication Concepts Ch. 1
Layered Network Architectures Chs. 1, 2
Protocols Ch. 2
2 (09/15) Analog and Digital Data Transmission. Lab00. Ch. 3, OPNET
Channel Bandwidth. Transmission Impairments. Ch. 3
3 (09/22) Guided and Wireless Transmission Media. Ch. 4 Homework #1 due
Signal Encoding Techniques Ch.
5
4 (09/29) Asynchronous & Synchronous Transmission. Ch. 6
Flow Control, Error Detection, HDLC Ch. 7
5 (10/06) Data Link Control Protocols. Ch. 7 Homework #2 due
Asynchronous Transfer Mode (ATM) Ch. 7
Frequency-Division Multiplexing Ch.
8
[PROJECT PROPOSAL DUE]
6 (10/13) Synchronous Time-Division Multiplexing, Ch. 8
SONET/SDN, ISDN. Lab02. Ch. 8, OPNET In-class Lab02 due
Asymmetric Digital Subscriber Line. xDSL Ch. 8
7 (10/20) [MID-TERM EXAM] [MID-TERM EXAM] Chs. 1-8
8 (10/27) WAN: Circuit-Switching Networks & Routing Ch. 10
Control Signaling Ch. 10
Packet-Switching Principles & Routing Ch. 10
X.25;
Frame Relay. Ch.
10
9 (11/03) Asynchronous Transfer Mode (ATM). Lab03. Ch. 11, OPNET In-class Lab03 due
10 (11/10) Routing in Switched Networks.
List-Cost Algorithms. Ch. 12 Homework
#3 due
Congestion & Traffic Management Ch.
13
11 (11/17) Local Area Networks. Lab04. Ch. 15, OPNET In-class Lab04 due
High-Speed LAN (Ethernet, Token Ring, Fiber Channel) Ch. 16
12 (11/24) NO CLASSES (Thanksgiving)
13 (12/01) Internetwork Protocols (IPv4,
IPv6, ICMP, IGMP) Ch. 18 Homework #4 due
14 (12/08) Routing Protocols (BGP, OSPF, RIP) Ch. 19
Transport Protocols (TCP, UDP) Ch. 20
Final
Exam Preparation
[PROJECT DUE] [PROJECT
DUE]
15 (12/15) [FINAL EXAM] [FINAL EXAM] Chs. 9-13, 15, 16, 18-20